The Kelbly's Atlas Tactical Long Action Magnum Bolt Face is a Remington semi-clone action, featuring a side bolt release and trigger hanger. There is little modification necessary to use a Remington 700/40x stock or chassis. This action utilizes a .750” diameter bolt and Sako extractor magnum bolt face Long action. You can also order a Lapua sized bolt from Kelblys and shoot Lapua sized cartridges!

was 1099, now 999!

We made the most rugged action possible for practical, tactical, or hunting. We use a Black Nitride finish from H&M Metal Processing . This allows you to use this action “dry” or without lubrication for extreme environments. As always it is best to use lubrication in normal day to day shooting. In addition to the Black Nitride process we use a fluted bolt, to help move dirt into the flutes allowing better function of the action.

We cut the magazine well to use the Accuracy International single stack magazines and will also work with the Wyatt’s MBE-3 ADL/BDL Box. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

We offer an Extreme Duty Bolt Stop, that bolts to the side of the action via a 6/48 screw. It is truly the most reliable bolt stop upgrade on the market!

We finish it all off with a dual-pinned 30 MOA Picatinny 1913 MIL-SPEC rail fastened with 8-40 screws, a dual pin recoil lug, and a tactical bolt knob.

Check out our other Bolt actions

Specifications